Mondince FM198 Carbon Full-Suspension MTB Frame
MSRP Price$545 USD
120mm travel full suspension carbon MTB frame with Boost 148 and BB92. Designed for trail and all-mountain riding.
Performance Carbon Frames for Your Next Ride
Compare Mondince carbon MTB bike frames by wheel size and suspension. A 120 mm full-suspension platform and a fat-bike frame are listed below. Carbon hardtail frames are collected on the Carbon Hardtail MTB Frame category. Then check rear axle spacing, bottom bracket, brake mounts and the geometry for your size.
MSRP Price$545 USD
120mm travel full suspension carbon MTB frame with Boost 148 and BB92. Designed for trail and all-mountain riding.
MSRP Price$568 USD
Carbon fat bike frame with 27.5"x4.5" tire clearance, 197mm rear spacing, and BSA 120mm bottom bracket. Unmatched float on snow and sand.
FM198 adds rear suspension, while FM120 uses a wider fat-bike rear end. Hardtail models are listed on the Carbon Hardtail MTB Frame category. Components are not interchangeable across these groups just because they are sold as mountain bike parts.
FM218, FM228 and FM238 are listed on the Carbon Hardtail MTB Frame category. Compare wheel size, BB, hanger and seatpost diameter there before requesting a quote.
The published configuration lists 120 mm travel and a 185 × 50 mm rear shock. Confirm shock hardware, fork dimensions and seatpost specification for the frame you order.
The published configuration uses 27.5 × 4.5-inch tires, a 12 × 197 mm rear end and BSA 120 mm BB. Plan the wheel and crank around these dimensions.
Specifications differ between models and versions. Confirm the order specification where product material lists more than one BB, hanger or brake-mount option.
Separate suspension and fat-bike decisions before comparing price or weight. Hardtail options are listed on the Carbon Hardtail MTB Frame category.
A rear-suspension bike and a wide-tire fat-bike build need different component plans. FM198 lists 120 mm travel; its 185 × 50 mm shock dimensions describe the shock, not the rear-wheel travel. Confirm the mounting hardware as well.
For FM120, start with the fat-bike wheel and crank dimensions. Its 197 mm rear spacing and BSA 120 mm shell are different from the Boost platforms. A wheel that fits another MTB frame is not automatically a match.
Treat BB, hanger and brake-mount choices as order-specific versions, not as standards supported simultaneously by one frame. Confirm the actual shell and hanger before buying a crank or derailleur.
Brake descriptions and older photos can also differ from the current specification. Ask for the mount type and supported rotor arrangement for the selected version. For FM198, the English material contains differing seatpost-diameter references, so have that dimension confirmed in writing.
Use the geometry for the intended fork and frame size. Check saddle height, reach and standover, then allow for the required seatpost or dropper insertion. A longer-travel fork can change the position and handling; verify the permitted configuration.
Ask whether the quote includes the rear shock, headset, axle, seat clamp and small mounting parts. Frame weight references may use different sizes, finishes or hardware, so compare equivalent conditions and include suspension components in the build budget.
Confirm the intended fork length and offset. On a full-suspension build, check shock eye-to-eye, stroke and hardware as separate requirements.
Match hub spacing, axle hardware, brake mounts and BB to the actual frame version. A Boost rear end does not define every other component interface.
Compare reach, stack, standover and seatpost insertion for your position. Confirm the available sizes rather than assuming each model has the same range.
FM218, FM228 and FM238 are listed on the Carbon Hardtail MTB Frame category. Use that page to compare geometry, wheel size, BB, hanger, brakes and seatpost diameter.
No. Eye-to-eye length and shock stroke are shock dimensions; rear-wheel travel also depends on frame linkage. FM198 lists 120 mm travel with a 185 × 50 mm shock configuration.
Confirm axle hardware, BB, brake mounts, fork dimensions, hanger and seatpost. Boost spacing alone does not establish those interfaces.
Provide the frame model and size, wheel and tire choice, fork, shock if needed, drivetrain, brake and seatpost part numbers. Confirm the supplied hardware and finish before ordering.
Compare the live hardtail models, including wheel size, BB, hanger and seatpost checks.
Use MTB sizing references to avoid poor fit and handling.
Help tall riders understand XL mountain bike frame selection.
Send Mondince your target rider, terrain, wheel size, suspension preference and quantity. We can recommend the right carbon MTB platform for sample or OEM production.
Interested in this product? Fill out the form below and we'll get back to you within 24 hours.